Sample Sidebar Module

This is a sample module published to the sidebar_top position, using the -sidebar module class suffix. There is also a sidebar_bottom position below the menu.

Sample Sidebar Module

This is a sample module published to the sidebar_bottom position, using the -sidebar module class suffix. There is also a sidebar_top position below the search.
Products
  • Register

BrilliantShine Fusion X3 120ML

25.00 SGD each

+

3 in 1 Solution. Stain Remover , Minor Scratch Remover & Gloss Enhancer with Ultra Slick Feel

 

BrilliantShine Fusion X3 Unique Features

  • On certain colored vehicles where a glass coating might not be able to reflect a full depth/richness, Fusion X3  brings out  the inner depth of the paintwork.
  • Fusion X3  stain removing action also helps greatly in removing stubborn stains that a clay and shampoo cannot remove. It is also serves as minor scratch remover.
  • Fusion X3  is applied  to allow the stacking of Permanon. Permanon on its ownself does not stack, ie reapplication of Permanon on a fresh coat does not result in a 2nd layer because the Permanon particles do not bond to themselves once the concentration is maxed out. Having an in-between layer allows a 2nd layer of Permanon to be coated on, thereby allowing you to have 2 layers of Permanon for greater paintwork protection.

 

Application instruction

 

(A) Using it as stain or minor scratch remover

  1. Dip 2 – 3 drops of the solution onto a small piece of dry sponge or chamois cloth and apply on the targeted area
  2. Spread the solution in a circular manner evenly until dry
  3. Repeat the procedure on other targeted areas
 

(B) Using it as a triple layer coating

  1. Shampoo and rinse your car
  2. Wipe dry your car ( Around 80% dry will do )
  3. Apply and spread Permanon Platinum on your car body
  4. Use a damp cloth to wipe your car after the application
  5. Dip a few drop of Fusion X3 into the chamois cloth/dry sponge and apply on the car surface area.
  6. Spread the solution in a circular manner evenly until dry
  7. Continue this process till all the car paintwork surface has been applied with Fusion X3
  8. Re-apply Permanon Platinum onto the car body
  9. This is to seal up the Fusion X3 coating ( Fusion X3 only have stain,minor scratch remover abilities and gloss enhancer with ultra slick feel abilities, it does not have the protection abilities )
  10. Your ride is now enjoying the 3 layer-ed coating. ( Permanon – Fusion X3 – Permanon ). With 3 layered coating, your ride is having double protection coating from Permanon Platinum.